Fiber Laser Cutting Machine Of High Efficiency

Qingyuan Laser is well-known as one of the largest and professional fiber laser cutting machine of high efficiency manufacturers and suppliers in China. With a group of professional and effective personnel, we can offer you fiber laser cutting machine of high efficiency at low price.

 

Fiber Laser Cutting Machine of High Efficiency

The fiber laser cutting machine condenses the laser beam into a small spot to obtain a high power density at the focal point of the beam, which causes the temperature of the material spotted by the laser to rise sharply, and instantaneously reaches the vaporization temperature, resulting in evaporation and forming a hole. The fiber laser cutting machine takes this as the starting point, and according to the shape requirements of the workpiece to be processed, the laser beam and the workpiece are moved relative to each other according to a certain trajectory to form a slit. In the process of the fiber laser cutting machine, the processing system should also be equipped with necessary auxiliary gas blowing devices to remove the slag generated from the slit.

Advantages of fiber laser cutting machine:

●The cutting gap is narrow and has good cutting accuracy. Due to the small diameter of the focused spot of the laser beam, the energy is concentrated at a high speed. The slit width is only about 0.1mm, which can save material.

●The cutting speed is fast and the heat affected zone is small. Taking the 500W fiber laser cutting machine as an example, the cutting speed of 1mm material can reach more than ten meters per minute. Because the energy of the laser beam is highly concentrated, during the cutting process, the irradiation time of the laser beam to complete the cutting is very short, so the degree of thermal distortion of the material to be cut is extremely extreme.

●The surface quality of the fiber laser cutting machine is good, the edge of the cutting seam is vertical, and the cutting edge is smooth. It can be directly welded without trimming.

●Since the fiber laser cutting machine is processed in the following non-contact form, there is no mechanical stress on the cutting edge, and no cutting burrs and chips are generated.

●The fiber laser cutting machine uses a beam of light with high energy density and strong brightness to act on the material to be cut for processing, so there is no tool loss and contact energy loss.

●The fiber laser cutting machine can easily cut hard and brittle materials, as well as soft and elastic materials.

●The beam runs without inertia and can be implemented as a high-speed fiber laser cutting machine. And the cutting is not restricted by the direction, and can be started at any part of the workpiece to start cutting or emergency stop to end processing at any time.

● Utilizing the characteristics of the laser, it can realize multi-station operation, and it is easy to realize CNC automation.

●Low cutting noise.

Cutting samples of fiber laser cutting machine:

Company Introduction	Factory Visiting	Products	Application

Hot Tags: fiber laser cutting machine of high efficiency China, suppliers, manufacturers, price