4 In 1 Type Handheld Laser Welding Machine
We Supply 4 In 1 Type Handheld Laser Welding Machine.
Product Introduction
4 In 1 Type Handheld Laser Welding Machine
 |
Features:
-Adopts sealed cabinet, the whole cabinet realizes dustproof design, saving space.
-Simpler daily maintenance.
-Modular design, easy to realize function expansion. Can realize wire welding, spot welding, butt welding, stack welding and so on.
-Red light focusing, precise control, small focusing spot, realizing high-precision positioning.
-Long time stable working ability, suitable for three shifts and long time operation.
-Provide a variety of specialized industry fixtures and control methods, the system is easy to realize.
Technical Parameter
| Part Name | Description |
| Laser | QY(no CE) |
| Welding Head | SUP23T |
| Cooling Chiller | 1.5Kw / 3Kw(Hanli) |
| Controller System | Welding system(QY) |
| Electrical Box | Chiller and laser integrated |
| Electrical Components | Schneider |
| Pneumatic Valve | SMC |
| Wire Feeder | For wire 0.8mm-1.6mm |
| Power Supply | QY-LWF15S-PSLVT / QY-LWF15-PSLVI / QY-LWF20-PSLVI 220V 50HZ QY-LWF30-PSLVI three phase 380V 50HZ |
| Chiller Capacity | 13L |
| Environment | (℃)0～40 |
| Power | 1000W | 1500W | 2000W | 3000W |
|
SS Weld penetration depth |
0.3-2 | 0.3-3 | 0.3-4 | 0.3-7 |
|
CS Weld penetration depth |
0.3-1.5 | 0.3-2.5 | 0.3-3.5 | 0.3-6 |
|
Al Weld penetration depth |
0.8-1 | 0.8-2 | 0.8-3 | 0.3-5 |
|
Copper Weld penetration depth |
0.8-1 | 0.8-1.5 | 0.8-2.5 | 0.3-5 |
The above parameters are reference values, it is related to the actual welding speed of the product and operator.
Welding angle and other attention matters
●During the welding process, the welding nozzle must be horizontal downwards under any circumstances and must never be upward.
●During the welding process, protective gas must be added. If the handheld welding lens is close to the workpiece without protective gas, it is easy to contaminate the protective lens.
●The maximum weld seam cannot exceed 2mm, if use single wire feeding machine, the maximum welding wire can be 2mm. If 3kw use double wire feeding machine, allow the weld seam not exceed 3.5mm.
●When welding non ferrous metals such as aluminum and copper, if they are too thick, if no sufficient power to weld, they must not be forcibly welded. Non ferrous metals have a reflective effect on lasers, and forced welding can damage the welding nozzle, laser lenses, and even the laser.
Machine Including：
Comparison of the effect of argon arc welding and laser welding
| Item | Argon arc welding | Laser welding |
| Heat input | Very high heat | Low heat |
| Deformed | Easy deform | Slight or no deformation |
| Welding spot | Large welding spot | Weld spot surprise, spot asjustable |
| Beautiful | Unsightly, high cost of polishing | Smooth and beautiful, good consistency, no need to deal with or low processing cost |
| Perforation | Easy to pierce | Not suitable for perforation, controllable |
| Protective gas | Need argon | Requires argon/nitrogen |
| Processing precision | Generally | Precision |
| Total processing time | Time consuming | Very short time -consuming ratio 1:5-1:10 |
| Operator safety | Strong ultraviolet light, radiation | Exposure to light, almost no harm |
| Operator requirement | High | Not high |
Hot Tags: 4 in 1 type handheld laser welding machine China, suppliers, manufacturers, price, Circle tube cutting, Aluminum coil laser cutting machine, Zero wastage tube cutting machine, Irregular shaped tubes, Three chucks tube laser cutting machine, Coil Steel Laser Cutting Machine
Send Inquiry
You Might Also Like
