6KW 2060 Exchange Table Metal Laser Cutting Machine

Laser Wavelength

1070nm

Maximum Power

6000W

Max Acceleration

1.2G

Power Consumption

32Kw

Max Speed

Single axis speed ≤100m/min

Complex speed ≤120m/min

Min Linewidth

0.15mm (for materials with thickness less than 0.4mm), depends on the sheet thickness

Cutting Thickness

MS: max 25mm, production 22mm;

SS: max 18mm, production 16mm;

Cutting Dimension

Exchange Table With Full Protection Cover 2000*4000mm x 2

Cutting Table Mechanical Accuracy： ±0.05mm

X,Y Repeated Positioning Precision： ±0.02mm

Power Supply: Three-phase 5 wires AC 380V±5%,50Hz/60HZ±1%

Air conditioner room:

with all electrical parts and laser source inside,

Heat isolation,Dust Isolation,Fire Proof

which will keep machine working stably even 24hours continued working, and prolong lifetime of electrical parts

Monitor Control System

For good sake of operator's safety

each dead corner area can be monitored during cutting

timely, the process can be controlled.

PS: camera not standard equip with machine.

The main frame adopts a gantry beam structure, and the table bed is produced by welded by steel plates, and the stress is eliminated by T6 heat treatment, so that the strength, rigidity, servo drive acceleration and deceleration and numerical control system are highly matched

Z-axis using modular mechanism.

Cutting head with Cooling Nozzle function

With high precision, high strength, high running stability and good sealing.

Automatic lubrication system

Steel Plate welded Structual, Heat treatment.Advantage design.

Beam is stable ,it will not deformation when running in a fast speed.

The console can be moved for easy operation.

Reserved a place for customer add WIFI receiver.

Big portrait screen for software and monitor.