CNC 6Kw Metal Sheet Laser Cutting Machine Shuttle Table With Cover
We Supply CNC 6Kw Metal Sheet Laser Cutting Machine Shuttle Table With Cover.
Product Introduction
CNC 6Kw Metal Sheet Laser Cutting Machine Shuttle Table With Cover
High end solution design
Ethercat control system Cutting area: 3000*1500mm 6000*2000MM Available from 12Kw-20Kw
Technical Parameter
|
Laser Wavelength |
1070nm |
|
Maximum Power |
6000W |
|
Max Acceleration |
1.5G |
|
Power Consumption |
35Kw |
|
Max Speed |
Single axis speed ≤120m/min
Complex speed ≤160m/min |
|
Min Linewidth |
0.15mm (for materials with thickness less than 0.4mm), depends on the sheet thickness |
|
Cutting Thickness |
MS: max 25mm, production 25mm;
SS: max 20mm, production 16mm; |
|
Cutting Dimension |
Exchange Table With Full Protection Cover
1500*3000mm
2000*6000mm |
|
Cutting Table Mechanical Accuracy： ±0.05mm |
|
|
X,Y Repeated Positioning Precision： ±0.03mm |
|
|
Power Supply: Three-phase 5 wires AC 380V±5%，50Hz/60HZ±1% |
|
Highlights
Power Control Room Equipped With Air Conditioner
Air conditioner room equipped with air conditioner
---with all electrical parts and laser source inside,
---Heat isolation、Dust Isolation、Fire Proof
---which will keep machine working stably even 24hours continued working, and prolong lifetime of electrical parts.
Machine Details-double filters, and auto dusting system
automatically dusting system there’s flap gates(2 each meter) to open automatically based on gantry movement position.
Three-way gas control with pressure detection Separated O2, N2 and air Two ways proportional valve.
Machine Details- Cutting Head
 |
1.Less Production Cost: consumable parts cost is lower. 2.Convenient for aftersales service: lens module design is easy to change at customers’ site. 3.From same company as controller company, compatibility better, some functions is exclusive to BOCI only. 4.Double seal structure, dust resistance of IP65 level, withstand the water test The anti-collision component is composed of four anti-collision bolts and four set screws, which are easy to replace. When the cutting head is subjected to a certain impact force. 5.The anti-collision component will be disconnected and the system will alarm to avoid serious losses to the end user. |
Machine Details- Plated Welded Table Frame With Heat Treatment
The main frame adopts a gantry beam structure, and the table bed is produced by welded by steel plates, and the stress is eliminated by T6 heat treatment, so that the strength, rigidity, servo drive acceleration and deceleration and numerical control system are highly matched.
No deformation in 20 years’ production.
|
Monitor Control System: For good sake of operator’s safety. Each dead corner area can be monitored during cutting timely, the process can be controlled. |
 |
 |
FAQ
1.I knew nothing about this machine, what kind of machine i should choose?
-Very easy to choose. Just tell us what you want to do by using CNC laser machine, then let us give you perfect solutions and suggestions.
2.What can it cut? How thick can it cut at most?
-Laser machine for metal usually deal with carbon steel, stainless steel, aluminum, brass and alloy. The maximum thickness is different between different models and materials. Please check in the product introduction page.
3.How long is the warranty?
-We offer 1-year warranty.
4.Where is your headquarters?
-Our headquarters is in wuxi,Jiangsu Province, China.
5.Can I visit your factory?
-Of course.Please contact us any time . We will arrange in advance.
6.Do you have engineer to teach me/my workers?
-Yes, we offer free training for each customer. We promise to help until everything gets right.
Hot Tags: cnc 6kw metal sheet laser cutting machine shuttle table with cover China, suppliers, manufacturers, price
Send Inquiry
You Might Also Like
