Home / News / Details

Daily Maintenance Of Laser Cutting Machine

20220222090813
With the popularity of laser cutting machines, maintenance is becoming more and more important. If you want to buy a laser cutting machine, you may want to read this article today.

The basic working principle of laser cutting machine

Laser cutting machine is a technology that utilizes the high-speed characteristics of laser to complete the cutting and processing of objects. It is usually used to make a variety of precision instruments, automotive parts and other products.

Daily inspection of the machine
1. Before the laser cutting machine is turned on, check the pressure status of the laser working gas and cutting gas, if the pressure is not enough, it needs to be replaced in time.
2. Check whether the buttons of X-axis, Y-axis, Z-axis zero point and laser ready status are damaged, (check the indicator light)
3. Check the water level of the circulating water in the chiller, if the water level is insufficient, it needs to be added in time.
4. Check the external optical circulating water circuit with or without leakage phenomenon, if there is leakage phenomenon should be cleaned up in a timely manner, otherwise it will affect the life of the optical lens.
5. After the completion of daily work, to clean up the work site waste in a timely manner, to keep the site clean, the air compressor bottom of the cylinder drain valve open for drainage, to be discharged after the waste water, close the water valve, in accordance with the order of switching off the machine in turn off the machine's main power supply.
Regular maintenance of machine tools
1. air intake: regularly clean up the air intake debris to ensure that the air intake effect.
2. Filter: Regularly check the filter in the air circuit, and promptly remove the water and debris in the filter.
3. Switch: Regularly check whether the screws of the bracket of the travel switch and the bracket of the bumpers are loose.
4. Electric control cabinet: to clean up the dust on the electric control cabinet ventilation fan filter, to ensure good ventilation, in order to facilitate the internal heat dissipation of electrical components.
5. Guide: every other week must check the X-axis guide and screw, Y-axis guide and screw, Z-axis guide and screw lubricant filling situation, to maintain the lubrication of the moving parts, to prolong the service life of the X, Y, Z-axis guide and screw.
Maintaining Optical Lenses
Do not touch the surface of the optical lens (reflector, focusing mirror, etc.) directly with your hands, so as not to cause scratches on the mirror surface, if there is oil stains or dust on the mirror surface, the lens should be cleaned in a timely manner;
Do not place the lens in a dark and humid place, as this will cause the surface of the lens to deteriorate.
Dust, dirt, or water vapor on the surface of the lens, easy to absorb the laser causing damage to the coating of the lens; light impact on the quality of the laser beam, or no laser beam generated.
1. Before the laser cutting machine is turned on, the laser should be routinely maintained to ensure stable laser performance;
2. Check the cooling water pressure to ensure that the cooling water pressure is stable;
3. Check the cooling water temperature to ensure that the water temperature is within the appropriate range of the laser.

Send Inquiry