How To Maintain Handheld Laser Welding Machine?
Laser equipment in the process of use will cause certain wear and tear, just the right maintenance, can reduce the generation of wear and tear and failure. This requires regular inspection of the laser equipment.
Maintenance matters that need attention:
1. Regularly check the power supply of the equipment.
Wiring whether there is loose, wire insulation wrapping whether there is slack or peeling.
2. Regularly clean up the dust.
Welding machine work in a dusty environment, you can regularly clean up the dust inside the welding machine, reactance coil and the gap between the coil coil seam and power semiconductors and other parts of the special wipe clean. Chiller then to clean the dust on the dust-proof network and condenser fins.
3. The welding gun is an important part of the welding machine, to be regularly inspected and replaced.
Due to wear and tear caused by the electric nozzle aperture becomes larger, it will cause the arc is unstable, the appearance of the weld deteriorates or sticky wire (back to burn); the end of the conductive nozzle sticky spatter, the wire feed will become unsmooth; conductive nozzle screwed tightly, the threaded connection will heat up and weld. To regularly replace the welding gun has been damaged. The chiller should be replaced once a month or so to replace the circulating water.
4. Pay attention to the ambient temperature.
Welding gun and chiller operating environment temperature should not be too high, one will affect the cooling and cooling of the chiller, one will affect the normal operation of the welding machine. Especially in the hot summer, pay more attention to the room temperature temperature, try to put the equipment in the ventilation to run. The temperature in winter should not be too low, the circulating water temperature is too low, the chiller will not start.
Do a good job of daily maintenance, handheld laser welding machine welding quality is better, the chiller cooling effect is better, but also to extend the service life.
