How To Reduce The Loss Of Laser Cutting Machine Parts?

The fragile parts of the light cutting machine are consumed too quickly due to the following aspects:

1. Operator's operating errors. Many operators have not received formal training, which leads to unfamiliarity with the laser cutting machine. It is inevitable that some operating errors will occur during the operation, so that the wearing parts are consumed too quickly. The solution is to require the operator to go to a formal factory for training, practice more and operate more.

2. The cutting parameter setting is not accurate. This is a situation that many manufacturers will encounter. When the laser cutting machine cuts different materials, the set parameters will be different, but in many cases, the set parameters are not accurate, which leads to increased difficulty in cutting and the effect of wearing parts is too fast. The solution is to perform more debugging when changing the cutting material to get the best cutting effect.

3. The laser cutting machine is used for too long, and the laser cutting machine is often used for too long. It is easy to cause the aging of the equipment, and each performance will be reduced. The dependence on consumables will be very large, which will also cause the consumables to be used too quickly . The solution is to perform routine maintenance on the equipment to ensure the stable performance of the equipment.

4. Frequent cutting of high-reflective metal materials, because high-reflective metal materials can damage the lens and laser, so if you cut frequently, it will reduce the use time of consumables. The solution is to reduce the cutting of highly reflective materials.

Reduce the consumption of consumables of the laser cutting machine, on the other hand, it can reduce the processing cost of the equipment, thereby improving the economic benefits of the manufacturer.

Company Introduction	Factory Visiting	Products	Application