How To Solve The Problem That One Side Of The Workpiece Cannot Be Cut Through When Laser Cutting?

●Hardware
1. First check whether the protective lens is contaminated
According to the type of lens contamination to check.
2. Check whether the nozzle is deformed and stained with slag.
Replace the nozzle with a new one.
3. Check whether the coaxial is off.
Use the tape to gently stick the nozzle, and then point shooting, according to the direction of light path deviation adjustment.
●Parameters
1. Check the laser cutting speed, look at the direction of the spark splash judgment.
2. Check the focus problem, positive focus is too high and negative focus is too low.
3. Check the air pressure is too low, the air pressure is too small residue removal can not be removed