Home / News / Details

Is Laser Welding Stronger Than TIG?


Weld quality and consistency

●Laser welding makes welding quality and consistency easy to control and maintain consistently. Because the laser head is not in contact with the workpiece, and there are no electrodes that can wear, corrode, or damage, there is no need to change tools in situations where the electrodes need to be reground or sharpened, as is the case with TIG. Lack of electrode trimming in laser welding results in higher uptime and longer maintenance interventions. In addition, there is no risk of tungsten contamination of the welding material from the tip of the TIG electrode when striking the arc.

Lower heat input

●With laser welding, the heat input to the metal being welded is lower, which means a smaller heat-affected zone (HAZ) and significantly less distortion of the assembly, making it easier to achieve complex and accurate assemblies, especially in automated setups.

Higher welding speed

●Welding speeds are generally higher for laser welding, especially modern high-power continuous wave (CW) fiber lasers. High welding speeds sometimes mean that the kinematic system (eg CNC system or robot contour speed) is the limiting factor for cycle time rather than the process.

Cost per meter of weld

●In higher throughput processes, laser solutions are often found to be more efficient and cost less per meter welded. Interestingly, some processes combine laser and arc welding to achieve deeper penetration and higher welding speeds. These hybrid processes typically combine laser welding to efficiently heat the metal to the melting point and arc welding to deposit droplets into the molten pool and enhance penetration and weld strength on either process as a stand-alone process.

Welds not completed

●Laser welding of stainless steel or aluminum under inert gas shielding generally does not require post-weld post-processing (grinding or trimming), the weld surface is bright and oxide-free, and can usually be coated or painted without further cleaning steps.

For ease of automation, consistent quality, there are distinct advantages to using laser welding.

_20220112112602

QY laser welding machine:


Working voltage: 220V/50Hz

Laser power: 1000W-2000W

Machine power: 1.5kw-1.7kw

The operating temperature of the whole machine: 10-40℃

Operating humidity of the whole machine: 0-80%


Advantages of QY laser welding machine:

●Labor saving, high speed, high efficiency and low cost.

●The operation is simple and easy to learn, the experience requirements of the operators are low, no skilled welders are required, and it is easy to recruit workers. The workers can carry out welding operations after basic training, and the novice can also weld beautiful welds.

●The continuous laser beam quality is good, the energy density is high, the welding speed is more than 2 times that of solid YAG laser welding, and 3-5 times that of argon arc welding, which can save at least 2 welders and 1 grinder a year.

●Integrated design, laser, water tank and control part are integrated together, occupying a smaller area and requiring less site. Equipped with moving pulleys, the station can be adjusted at any time according to site requirements, which is convenient and flexible.

2022 1

Send Inquiry