Maintenance Tips For Fiber Laser Cutting Machine

1. Use a vacuum cleaner to suck up the dust and dirt in the fiber laser cutting machine every week, and the electrical cabinet should be closed to prevent dust.

　2. Check the straightness of the track and the verticality of the machine every six months, and find that it is not normal to maintain and debug in time. If this is not done, the finished product may not be very good, and the error will increase, which will affect the cutting quality.

　3. Always check that the steel belt of the fiber laser cutting machine should be tightened. Otherwise, if there is a problem in operation, it may hurt people, and if it is serious, it can cause death. The steel belt looks like a small thing, and the problem is still a bit serious.

4. The guide rails should be cleaned frequently, and dust and other debris should be cleaned, so that the normal rack of the fiber laser cutting machine should be wiped frequently and lubricated so that there is no debris. The guide rails should be cleaned and lubricated frequently, and there is The motor should also be cleaned and lubricated frequently, so that the machine can move smoothly while it is moving, cut accurately, and the quality of the cut products will be good.

     5. The dual focus laser cutting head is a vulnerable item on the laser cutting machine. Long-term use will cause damage to the laser cutting head.