Precautions For Using Hand-held Laser Welding Machine.

Handheld laser welding machine has been widely used because of its convenient use, basically no deformation in welding, small welding seam width, and fast welding speed.

So, what problems do you need to pay attention to when using a handheld laser welding machine?

QY Laser Welding Machine

Laser Power:1000W;1500W;2000W.

Laser Source: Raycus.

Operating Voltage: 220V/50Hz.

Welding Head:SUP20.

Power Consumption:1.5Kw.

1. Preparation before work

The staff should wear radiation protection glasses and safety protective clothing to ensure the safety of the staff.

2. Welding machine protection

It cannot be used together with arc welding machines (argon arc welding, spot welding) to prevent circuit reflow from causing damage to the parts of the laser welding machine.

3. In use

When using a laser welding machine, we should pay attention to the fact that the welding head cannot be aimed at any part of the body, nor can the welding head be directly placed on the ground to prevent dust from affecting it.

Note that the bending radius of the fiber optic corrugated tube should not be less than 20cm to prevent the fiber from burning.

4. After use

If you need to leave temporarily during use, you need to click the "Stop" button to make the laser welding machine enter the standby state, and shut down after get off work. You must also press the "Stop" button to turn off the equipment.