Problems Encountered in Laser Cutting Of Steel Structures And Their Solutions

During the cutting process of steel structure, the following common problems may be encountered:

1. Thermal influence area (HAZ): Because laser cutting is cut based on thermal basis, the laser beam will generate high temperature in the cutting area, causing the heat -impact area, which may cause material deformation, hardening or quality.

2. Bond: During the cutting process, there may be some problems that are not smooth or the edges. This may affect cutting quality, aesthetics, and assembly of workpieces.

3. Cutting: Cingding means that the vertical line of the cutting line and the surface of the material is not a right angle. It may be due to the unsettled angle of the laser beam and the surface of the material. Cutting may affect the installation of the connector and the accuracy of the material.

4. Welding seam residue: Welded joints or welds may be available in the steel structure. During the laser cutting process, welded residue and welded stabbing may be left near the weld. These residues may require additional processing steps.

5. Coating effect: If there is coating (such as spray coating) on ​​the surface of the steel structure, the laser may react or burn the coating during the cutting process to affect the protection of the cutting quality and the protection of the coating.

As a intelligent and automated metal cutting device, laser cutting machine has the advantages of high accuracy and high efficiency. It is the best choice for the steel structure. In order to solve these possible problems, some measures can be taken, such as adjusting laser cutting parameters, optimizing the cutting path, and using auxiliary gas for blowing and cleaning. At the same time, correct operations and experience are also the key to avoiding these problems.