Process Advantages Of Laser Welding Machines For Welding Ultra-thin Materials

Traditional welding machine processing thin stainless steel has a big problem, thin stainless steel due to its thermal conductivity is very small, the constraints are small, so in the welding process, once the local heating and cooling effect, it will form uneven stress and strain, longitudinal contraction of the weld on the outer edge of the stainless steel plate to produce a certain amount of pressure, the traditional welding machine, once the pressure is too large will result in the workpiece's wave deformation, not only affect the aesthetics will also affect the quality of the workpiece. Aesthetics will also affect the quality of the workpiece, in addition to over-burning, burn-through problems. The emergence of fiber laser welding machine to solve this problem. Laser welding uses high-energy laser pulses to locally heat the material in a small area.
Metal laser welding machine welding metal relative to other welding machine has the advantage of a wide range of applications, can be widely used in stainless steel, metals, alloys and so on the same material welding, but also to achieve the welding of different materials; then the laser welding machine in the welding of ultra-thin materials, what are the advantages of the process?

Laser welding machine in the welding of ultra-thin materials process advantages:
1.Modular design, easy to realize the function expansion. Can realize the addition of wire welding, spot welding, butt welding, stack welding and so on.
2.Laser processing welding is contactless processing, there is no tool loss and tool exchange and other issues. The laser beam energy is adjustable, the moving speed is adjustable, can be a variety of welding processing.
3.Red light focusing, precise control, focusing point of light is small, to achieve high-precision positioning.
4.Welding process has no pollution to the environment, in the air can be directly welded, easy process.
5.Small welding point, narrow welding seam, neat and beautiful, no need to deal with after welding or only simple treatment process.
6.Because the beam is easy to transmit and control, and do not need to change the torch, nozzle, significantly reduce downtime to assist time, so the load factor and productivity are high.