Laser Cutting Machines Have Become The First Choice For Cutting In The Stainless Steel Industry
The principle of laser cutting machine cutting and processing stainless steel
The principle of laser cutting is to use a laser as a preheating heat source and an active gas such as oxygen as the cutting gas. On the one hand, the blown gas reacts with the cutting metal to cause an oxidation reaction and release a large amount of oxidation heat. On the other hand, the molten oxide and melt are blown out of the reaction zone to form a cut in the metal. Since the oxidation reaction in the laser cutting process generates a lot of heat, the energy required for laser cutting is only half of the melting and cutting, which greatly improves the production efficiency.

Advantages of laser cutting machine cutting laser stainless steel
The laser cutting machine cuts and processes the stainless steel material with a smooth and beautiful surface, and the roughness is only tens of microns. Even laser cutting can be used as the last process without mechanical processing, and the parts can be used directly. After the material is laser cut, the width of the heat-affected zone is very small, and the performance of the material near the slit is almost unaffected. The workpiece has small deformation, high precision, good shape of the slit, and the cross-sectional shape of the slit is relatively regular rectangular. The cutting process has low noise, low vibration and no pollution.
The greater the power of the laser cutting machine, the greater the thickness of the material that can be cut, and the higher the speed. Therefore, compared to the low-power laser cutting machine, the high-power laser cutting machine can adapt to a wider range of materials and thicknesses. The material does not need to be clamped and fixed during laser cutting, which not only saves tooling and fixtures, but also saves auxiliary time for loading and unloading. There is no contact between the torch and the workpiece during laser cutting, and there is no tool wear.
The precision and quality of laser cutting machine cutting and processing of stainless steel materials are the customer's concern. For these two aspects, the main influencing factor is the use and understanding of the equipment by the manufacturer's operators. If the operator of the manufacturer can understand and use the equipment, and know what parameters are set for the cutting process of which material, then the quality of the product can be guaranteed. Therefore, the quality of laser cutting machine cutting and processing stainless steel materials still has a lot to do with manufacturers.

