The Reason Why The Laser Cutting Machine Has Serrations

1. Vibration: If the machine vibrates, the products it cuts will have saw teeth. It is divided into two reasons. One is the external situation of the machine. For example, during the cutting process of the machine, such as the water tank, the exhaust fan will not be too close. If it is too close, it will be next to the machine tool, and it will vibrate when it is running. The machine tool, what, when the machine is cutting the material, it will vibrate, which will affect the edge effect of the cutting. Another reason is the vibration caused by the control. If the motor is not running smoothly, etc., it can also cause this problem. Another reason is that if the machine is not adjusted well, it will also happen. Such as the running acceleration of the machine, or the take-off speed, etc., if it is not set well, it will also happen.

2. The lens is not locked: Sometimes, if the lens is not locked, the lens will vibrate when the machine is running, and the light will also vibrate when the machine is cutting, and the cut product will not work well. , there will also be sawtooth occur.

3. Machine parallelism: If the parallelism of the machine is not installed, it will not be stable when the machine is running. Why, it will also vibrate during the running process, and the cut products will also be generated in the sawtooth. occur.

4. Gear seat, etc.: If the edge of the gear seat is close to the seat, causing slippage, etc., it also causes this situation to occur.