What Are The Criteria For Cutting Quality Of Laser Cutting Machine?

With the development of technology, laser technology has been used in various industries. Laser cutting is a precise processing method, which can cut almost all materials, including two -dimensional cutting or three -dimensional cutting of thin metal boards. Laser cutting machine is a craft revolution in sheet metal processing, and is the "processing center" in sheet metal processing.
Laser is to use material to stimulate light. This light has a strong temperature. When contacting the material, it can quickly melt on the surface of the material to form a punch. Compared with the traditional cutting method, the cutting method is smaller and the cutting speed is fast.
The cutting quality and effect of the laser cutting machine are very good, but there are many factors that affect the cutting quality of the laser cutting machine. So, what are the factors that affect the cutting quality of the laser cutting machine?
Analysis of the factors that affect the cutting quality of the laser cutting machine:
1. The cut width and verticality of the cutting quality of the laser cutting machine
The width of the incision usually does not affect the quality of the cutting. Only when the outline is formed inside the parts, the cutting width has an important role. This is because the width of the cutting is determined. Also increase. If the thickness of the metal plate exceeds 10mm, the verticality of the cutting blade is very important. When it is far away from the focus, the laser beam becomes disperse. According to the focus position, the incision becomes wider at the top or bottom, the more vertical the edges, and the higher the cutting quality.
2. The roughness and lines of the cutting quality of the laser cutting machine
The laser cutting part will form vertical texture, and the depth of the particles determines the roughness of the cutting surface; the shallow the particles, the smoother the cutting part. In most cases, the roughness must be reduced as much as possible, so the lighter the texture, the higher the cutting quality. When a high -speed cutting plate blank, the melting metal does not appear in the slit below the vertical laser beam, but is sprayed after the laser beam is deflected. To solve this problem, the feed speed is reduced at the end of the cutting process.
3. Materials that affect the cutting quality of laser cutting machines, burrs, and deformation
During the cutting process, the surface of the slit can form the surface deposition, and the amount of materials deposited can also be seen. The quality of the laser cutting equipment can also be seen. The formation of the burrs determines a very important factor in the quality of laser cutting. Because the additional workload requires additional workload, the severity and quantity of the burrs can directly determine the quality of cutting. If cutting causes the parts to heat up sharply, it will deform, so the smaller the deformation, the better the cutting quality.