Home / News / Details

What Are The Operation Regulations Of Laser Cutting Machines?

20220222090821

The operation regulations of laser cutting machines:
1.Follow the safety operating procedures for general cutting machines. Laser strictly starts the laser startup program.
2.The operator must be trained, familiar with the structure and performance of the equipment, and master the relevant knowledge of the operating system.
3.Wearing labor protection products in accordance with regulations, protective glasses must be worn near the laser beam.
4 .Before you do n’t know if a certain material can be irradiated or heated with laser, do not process it to avoid potential danger of smoke and steam.
5.When the device starts, the operator shall not leave the post or custody without authorization. If you really need to leave, stop or cut off the power switch.
6.The fire extinguisher shall be placed in a place where it can be reached; the laser or switch is turned off without processing; paper, cloth, or other flammable materials shall not be placed near the unprotected laser beam.
7.When abnormalities are found during the processing process, they shall be stopped immediately to eliminate the failure or report to the competent personnel in time.
8.Keep the laser, bed and surrounding venues neat, orderly, and oil -free.
9.When using a gas cylinder, it shall be avoided by pressing the welding wire to avoid leakage accidents. The use and transportation of gas cylinders should abide by the gas cylinder supervision process. The gas cylinder is forbidden to be exposed to the sun or near the heat source. When opening the bottle valve, the operator must stand on the side of the bottle mouth.
10.High -pressure safety regulations shall be complied with during maintenance. Maintenance of every 40 hours or weekly, every hour or six months shall be carried out in accordance with regulations and procedures.
Article 11 After starting, the machine tool should be performed manually X and Y in the direction to check whether there are abnormal.

Send Inquiry