Home / News / Details

What Materials Can A Fiber Laser Cutting Machine Cut?

H52b30eaef41d4ea2bdc7df37ae4f91aes

The main cutting machine used for cutting technology in the market is fiber laser cutting machine, which is widely used because of its wide cutting range, fast cutting speed, good cutting effect, and maintenance-free. Especially in the cutting of sheet metal materials, the fiber laser cutting machine has more advantages. So what materials are fiber laser cutting machines mainly used for cutting?

1. Carbon steel

When a fiber laser cutter uses oxygen as the processing gas, the cutting edge is slightly oxidized. When the thickness reaches 4mm, nitrogen gas can be used as the processing gas for high pressure cutting. In this case, the cutting edge will not be oxidized. If the thickness of the plate is more than 10 mm, the special plate can be used for the laser of the steel plate laser cutting machine, and the surface of the workpiece can be oiled during processing to obtain better results.

2. Copper, brass

Both materials have high reflectivity and excellent thermal conductivity. Brass with a thickness of less than 1mm can be cut with nitrogen gas; copper with a thickness of less than 2mm can be cut with oxygen. Copper and brass can only be cut if a "reflection absorption" device is installed on the system. Otherwise, reflections can destroy optical components.

3. Stainless steel

Stainless steel is the most widely used in all industries. When cutting stainless steel with a fiber laser cutter, the edges obtained using nitrogen are not oxidized, while burrs are not affected by edge oxidation. Applying an oil film to the surface of the board will result in better perforation without compromising the machining quality.

4. Aluminum alloy

For fiber laser cutter, despite its high reflectivity and thermal conductivity, it can cut aluminum with thickness less than 6mm, depending on alloy type and laser capacity. When cutting with oxygen, the cut surface is rough and hard. When nitrogen is used, the cut surface is smooth. Pure aluminum is difficult to cut due to its high purity. Cutting is only possible when a "reflection absorption" device is installed on the fiber laser cutter system. Otherwise, reflections can destroy optical components.

Fiber laser cutting machines belong to the category of metal cutting machines, so they can only be used to process metals and cannot be used to process non-metallic materials such as stone, cloth, leather and other materials. The reason is that the wavelength range of the fiber laser cutting machine is no longer in the absorption range of this material, or it is not suitable for absorption and cannot achieve the desired effect.

Second, fiber laser cutting machines cannot cut MDF. The fiber laser cutting machine belongs to thermal processing. Cutting MDF will cause burning, so that the cutting edge will burn and cannot meet the cutting requirements. Such materials are mainly raw materials of fiberboard, wood fiber and plant fiber, and some are wood-based panels made of urea-formaldehyde resin and adhesives. These types of materials fall into the category of MDF and cannot currently be processed by fiber laser cutters.

There are also some highly reflective materials, such as copper and other rare metal materials. Although this type of material can be cut with a fiber laser cutter, it is also a concern that some of the reflected energy will burn the protective mirror since the wavelengths used for laser light are not in the ideal absorption range of these materials.


Send Inquiry