Home / News / Details

What Role Does The Auxiliary Gas Play in Laser Cutting? How To Choose?

20220222090442

The role of auxiliary gas has the following four points:

1.Allow the auxiliary gas to react chemically with the metal material to increase the cutting speed;

2.Help the equipment to blow off the slag from the cutting area and clean the slit;

3.Cooling the area adjacent to the cutting seam, reducing the extent of the heat-affected zone;

4.Protects the focusing lens and prevents combustion products from staining the optics.

Different gases have different roles:
Oxygen cutting carbon steel as an accelerant to increase the thickness of the cut, while nitrogen cutting stainless steel inert gas and plate does not have a chemical reaction, which can make the cut section to show the original color of the metal.

Air
The main function of air is slag removal. 21% oxygen mixed in the air will cause oxidation and thus increase the cutting speed. When the flow rate is sufficient, the higher the pressure, the better the dross removal effect.

Nitrogen
Nitrogen's main role is to slag, in cutting conventional plates such as carbon steel, stainless steel slag while inhibiting the chemical reaction of the plate. When the flow is sufficient, the higher the pressure, the better the slagging effect. The lower the purity of the inhibition of oxidation ability is worse, resulting in cutting section will have black and yellow phenomenon.

Oxygen
Oxygen's main role is to discharge slag, at the same time as a combustion agent to assist cutting. The best results are achieved when the flow rate is sufficient and the pressure is moderate. The lower the purity, the worse the combustion aid, the same thickness will require more gas.

cutting sample5

The amount of gas pressure is also an important factor in ensuring the purity of the auxiliary gas. If the pressure of the auxiliary gas is not properly matched, it will also have a certain impact on the cutting effect. Therefore, the gas and air pressure must be selected according to the characteristics of the cut product during the cutting down process.

Send Inquiry