What System Does The Laser Cutter Use？

In the laser cutting industry, the most common is the fiber laser cutting machine and carbon dioxide laser cutting machine. Both laser cutting machines are composed of laser, beams, mirrors, and optical systems. However, the most important of this is the laser, so what system does the laser cutting machine use?

For this issue, different manufacturers have different claims, but they are basically similar. The laser light sources used are generally CO2 laser or optical fiber laser. CO2 laser is cheaper than optical laser, but laser power is relatively low. The cutting accuracy of the fiber laser is high, the power is relatively high, but the cost is relatively high.

When cutting with a fiber laser, it is necessary to match the appropriate reflex mirror to cut the metal plate normally. The more important thing is the choice of the reflector. If you do not pay attention to the selection of reflectors, it will not only affect the accuracy of laser cutting, but also cause a serious impact on the incident of laser beams to the material. The reflector is generally in the form of triangular, ectopic prisms.

If it is used in fiber laser, the lens group is generally used to focus on large treatment.
Under normal circumstances, you need to pay attention to whether the distance between the fiber generator when choosing a reflector is sufficient to avoid the occurrence of the situation that affects the transmission of optical fiber.