Getting To Grips With Metal Laser Cutting Machine Operating Practices: Key Points Not To Be Missed!
When using a metal laser cutting machine, it is vital to ensure that the operator fully understands and complies with the operating methods and safety protocols. The following are some basic operating practices and safety precautions, familiarize yourself with it, remember it, and apply it, this is a necessary homework for every operator, let's review the metal laser cutting machine operating regulations again!
1. Preparation before operation
●Read the manual
First of all, read and understand in detail the manual and safety instructions of the equipment. This is the basis for understanding the characteristics and operating requirements of the equipment.
●Checking the equipment
Before each use, check that all parts of the laser cutting machine are in good condition, including the laser, the cooling system, the gas supply, the drive mechanism and the safety guards.
●Wear protective equipment
Wear appropriate protective eyewear, clothing, gloves and earplugs to protect against laser radiation, splashes and other potential hazards.
●Working Environment
Ensure that the work area is tidy and free of debris, well ventilated, and away from flammable and explosive materials.
2.Operating Procedures
●Start-up procedure
Follow the start-up sequence in the equipment manual, first turn on the auxiliary equipment (e.g. cooling system, gas supply), then start the main power supply and laser system.
●Software setting
Set the cutting parameters correctly in the control software, including laser power, cutting speed, gas type and flow rate, etc., and adjust them according to the material type and thickness.
●Material Positioning
Accurately place the material to be cut on the working table and fix it with clamps to ensure that it will not move during the cutting process.
●Start cutting
After confirming that there is no error, start the cutting program, pay attention to observe the cutting process to ensure that everything is normal.
●Emergency stop
Familiarize yourself with the location and operation of the emergency stop button, and press it immediately when encountering abnormal situations.
3.New start Comprehensive upgrade
●Avoid looking directly at the laser
Laser is harmful to human body, do not look directly at the laser beam or reflected light.
●Fire and explosion prevention
Laser cutting process may produce high temperature and sparks, ensure that the work area is free of flammable materials, and equipped with fire extinguishing equipment.
●Gas Safety
When using inert gases (e.g. nitrogen) as auxiliary gases, pay attention to gas leakage and concentration monitoring to avoid the risk of asphyxiation.
●Electrical Safety
Regularly check the electrical wiring and grounding to ensure that the equipment is well grounded to avoid electric shock accidents.
●Maintenance
Regularly maintain the equipment, clean the accumulated dust and dirt, check the wear and tear of the parts, and replace the damaged parts in time.
4.Training and Inspection
●Read the manual
First of all, read and understand in detail the manuals and safety instructions for the equipment. This is the basis for understanding the characteristics and operating requirements of the equipment.
●Checking the equipment
Before each use, check that all parts of the laser cutting machine are in good condition, including the laser, cooling system, gas supply, drive mechanism and safety guards.