How To Prevent The Decline Of Cutting Performance Of Fiber Laser Cutting Machine?

With the development of laser cutting technology, fiber laser cutting machine has been widely used. During the use, we usually find some problems. For example, laser cutting machine will have some problems such as slow cutting speed and poor cutting accuracy after using it for a period of time. It may be because the fiber laser cutting machine has some loss during long-term use, which affects the cutting performance. Let's analyze the reasons for the decline of cutting performance of fiber laser cutting machine.
1. Power: After the machine is used for a long time, the power of the laser will decline more or less, which will directly affect the cutting performance of the laser cutting machine;
2. Distance: The distance between the workpiece and the nozzle also affects the cutting effect of the laser cutting machine, so it is necessary to adjust the appropriate distance without affecting the cutting performance;
3. Position: The focus position directly affects the cutting progress. The diameter of the focus spot should be as small as possible, so as to produce a narrow slit. If the cutting performance declines, adjusting the focus position is a good method;
4. Long-term overload production, lack of maintenance and improper operation of operators are all reasons for the decline of cutting equipment performance.
After finding the reason for the decline in the cutting performance of the fiber laser cutting machine, we can take appropriate measures and take preventive measures to timely and effectively avoid or slow down the decline in cutting performance.
Pay attention to the maintenance of the machine at ordinary times. Long-term processing of the fiber laser cutting machine will cause wear of the parts, which will inevitably affect the cutting performance of the machine. Therefore, daily maintenance is very important. Daily maintenance can be carried out according to the daily maintenance table of the production company.
Standardize the operation of the machine. Now the larger fiber laser cutting machine manufacturers will let customers arrange special personnel to receive training and train the machine operation process. Only after the training is qualified will they be arranged to work on the job. Special operation is not only conducive to the normal operation of the fiber laser cutting machine, but also effectively avoids safety accidents.