What Are The Main Components To Maintain The CNC Cutting Machine?

The CNC cutting machine can be used to cut steel plates, and it is also a kind of CNC cutting, so if you want to have a comprehensive understanding of steel plate cutting, then this aspect should not be missed, and you must know it.

Maintenance of the CNC cutting machine is indispensable to extend the service life, maintain cutting accuracy and efficiency from time to time on-line, so this work is very important, we should take it seriously, and we should not be sloppy.

1. Daily maintenance

　　 (1) After working every day, clean up the machine tool and guide rail in time to keep it clean and tidy, and turn off the air source and power supply in time, and exhaust the remaining air in the pipe belt.

　　 (2) The guide rails and racks of machinery and equipment should be well lubricated.

　　(3) When the equipment is running, if the operator wants to leave for a long time, the equipment power supply should be turned off first.

　　 2. Weekly maintenance

　　(1) Carry out a comprehensive inspection, cleaning and cleaning of the equipment, and at the same time add lubricating oil for lubrication.

　　(2) Check whether the track wiper works normally, whether it needs to be replaced, and whether the cutting torch is loose.

　　 3. Monthly and quarterly maintenance

　　 (1) Check each part of the equipment to see if it can work normally and whether there are any problems that need to be dealt with.

　　 (2) Check each button switch in the equipment to see if there is any damage, if any, replace it in time.

　　(3) Check the accuracy of the machine and whether it meets the specified requirements.