What Are The Problems Of Laser Cutting Machine Cutting Carbon Steel？

Problems and solutions of laser cutting machine cutting carbon steel

Laser cutting machines have the advantages of high efficiency, high quality, high precision, intelligence, etc., and are widely used in sheet metal processing, but there will also be some problems in the application process, especially when customers do not have professional laser cutting engineers. Problems occur from time to time, which will affect the normal operation of the machine and the quality of the carbon steel cut. So what problems will be encountered in the operation process, let's take a look at it together.

(1) Reasons and solutions for uncut carbon steel:

1. The selection of the laser nozzle does not match the thickness of the sheet, so replace the nozzle or sheet;

2. The laser cutting line speed is too fast, and operation control is required to reduce the line speed.

(2) Reasons and solutions for burrs in cutting carbon steel:

1. If the laser focus position is shifted, do the focus position test and adjust it according to the offset of the laser focus;

2. The output power of the laser is not enough. It is necessary to check whether the laser generator is working normally. If it is normal, observe whether the output value of the laser control button is correct. If it is not correct, adjust it;

3. The cutting line speed is too slow, it is necessary to increase the line speed during operation control;

4. The purity of the cutting gas is not enough, and it is necessary to provide high-quality cutting working gas;

5. The instability of the machine tool for too long running time needs to be shut down and restarted at this time.

Wuxi qingyuan laser technology Co.,ltd

Manufacturer of laser cutting machine/ pipe laser cutting machine/ laser welding machine/coil material laser cutting machine/ fiber laser cleaning machine/ bending machine