3 Chuck Zero Tailing Wastage Laser Cutting Machine For Pipes

3 Chuck Zero Tailing Wastage Laser Cutting Machine For Pipes

the machine can cut tube with shapes like following round pipe square, rectangle oval, triangle U shape and so on Optional: H and T

Send Inquiry Chat Now

Product Introduction

Qingyuan Laser is well-known as one of the largest and professional 3 chuck zero tailing wastage laser cutting machine for pipes manufacturers and suppliers in China. With a group of professional and effective personnel, we can offer you 3 chuck zero tailing wastage laser cutting machine for pipes at low price.

Specification

Round pipe: 20~219mm

Square Pipe: 20*20~150*150mm

Length: 6m

Tube Shape: round pipe, square, rectangle, oval, triangle, U shape and so on, H and T optional with different cutting head

★Three chucks and 8pcs of Ethercat motor
★Cutting head is capable of moving from front of middle chuck to back side, to reduce wastage and increase accuracy（if the last piece of pipe length more than 950mm, wastage zero, less than 950mm wastage 280mm）
★With auto unloading optional Software: Tubepro, Nesting software: TubesT.

Features:

Beam quality: smaller focused spot, finer cutting lines, smooth cut, beautiful appearance, no distortion, higher work efficiency, and better processing quality;
Choose a well-known fiber laser, the light guide system is composed of optical fibers, there is no lens in the laser generator, no maintenance is required during use, small and compact, easy to integrate, no start-up time, high power density, better optical mode, imported laser Manufacturers with better core technology;
The chuck has a self-adjusting center function, which can realize quick centering and clamping. With automatic center finding function.
The use of professional software can realize the timely processing of various graphics and texts, which is simple and convenient to use;
Segmented feeding cutting to improve cutting accuracy.
The cutting accuracy is high, and the dimensional accuracy is high. The cut is flat and clean, without burrs, and material loss is minimal;
The three-chuck structure and the double-clamping function of the middle chuck can assist in correcting the deformation of the small tube and improve the cutting accuracy.
It can realize zero tail material cutting and improve material utilization rate;
High-speed automatic cutting, meeting the cutting of special-shaped tubes such as round tubes, square tubes and rectangular tubes.

3Thuck